Low sulphur fuel oil (LSFO) and high sulphur fuel oil (HSFO) are both residual-based fuels, but they are treated very differently by shipping regulation. The difference comes down to sulphur content — and the rules on how much sulphur a ship may emit.

The IMO 2020 sulphur limit

Since 1 January 2020, MARPOL Annex VI has limited the sulphur content of fuel oil used on board ships to 0.50% m/m outside designated emission control areas, down from the previous 3.50% limit. This change is widely known as IMO 2020. From 1 March 2020, ships without an approved compliance method are also prohibited from carrying non-compliant fuel for use on board.

Inside emission control areas (ECAs) the limit is stricter, at 0.10% m/m.

What LSFO means

In the market, LSFO usually refers to fuel oil with a sulphur content of 0.50% or less — often called very low sulphur fuel oil (VLSFO). It allows ships to comply with the global limit without additional equipment on board.

What HSFO means

HSFO is residual fuel oil with sulphur content above 0.50%, typically up to 3.50%. Ships can still burn HSFO if they are fitted with an approved exhaust gas cleaning system (a scrubber) that brings emissions to an equivalent level. HSFO is also used in power generation and as a refinery feedstock.

Comparison

LSFO (VLSFO)HSFO
Sulphur content0.50% m/m or lessAbove 0.50%, typically up to 3.50%
Use on ships outside ECAsCompliant without extra equipmentOnly with an approved scrubber
Use inside ECAsNot compliant unless 0.10% or less, or with a scrubberOnly with an approved scrubber
Other marketsMarine fuel, blendingScrubber-fitted ships, power generation, refinery feedstock

Why the price spread matters

LSFO is generally priced above HSFO. The size of this spread affects voyage costs for charterers, the payback on scrubber investment for shipowners, and arbitrage opportunities for traders moving fuel oil between regions. Spreads change with refinery output, crude quality and demand, so they should be checked against current market assessments rather than assumed.

Practical considerations

  • Confirm the fuel specification and sulphur content on the bunker delivery note.
  • Check compatibility before mixing fuels from different suppliers on board.
  • Plan fuel changeover before entering an emission control area.
  • For time charters, agree which party bears the cost of compliant fuel and any changeover.
This article is general information and reflects the IMO sulphur rules as in force at the review date shown above. Always confirm current regulations with the flag state, class society or IMO.

Sources

Work with WSC

WSC trades LSFO, HSFO, gasoil and other petroleum products alongside its shipping activities. See our oil and energy trading page or send a trading enquiry.